Moebooru: Difference between revisions
Antonizoon (talk | contribs) |
Antonizoon (talk | contribs) No edit summary |
||
(36 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{Note|This guide is up to date and tested as of 2017-01-28. Moebooru does evolve gradually, so installation steps may change with time. If you find any divergences, please create an account and fix them.}} | |||
'''Moebooru''' is a well maintained Danbooru-style image tag system, used by Yande.re, Konachan, and many others. It is written in Ruby, and can be a bit of a challenge to install. Since many other installation guides are insufficient, we've noted down our entire installation and configuration process for [https://booru.eikonos.org Eikonos]. | '''Moebooru''' is a well maintained Danbooru-style image tag system, used by Yande.re, Konachan, and many others. It is written in Ruby, and can be a bit of a challenge to install. Since many other installation guides are insufficient, we've noted down our entire installation and configuration process for [https://booru.eikonos.org Eikonos]. | ||
Line 60: | Line 62: | ||
{{ic|libpqxx}} is required for libpq-ruby to build. | {{ic|libpqxx}} is required for libpq-ruby to build. | ||
Now log in and create the moebooru database and user: (make sure to | Then, initialize and start the database. | ||
{{bc| | |||
# /usr/pgsql-9.6/bin/postgresql96-setup initdb | |||
# systemctl start postgresql-9.6 | |||
}} | |||
Now log in and create the moebooru database and user with createdb permissions: (make sure to give it a very good password!) | |||
{{bc|$ sudo su # becoming the postgres user doesn't really work with sudo for some reason | {{bc|$ sudo su # becoming the postgres user doesn't really work with sudo for some reason | ||
# su - postgres | # su - postgres | ||
$ psql | $ psql | ||
postgres # | postgres # CREATE USER moebooru_user WITH PASSWORD 'your_password' CREATEDB; | ||
}} | |||
Finally, edit {{ic|pg_hba.conf}} from {{ic|ident}} to {{ic|md5}} (except for the UNIX socket line) to allow users to log in using a password (required by moebooru's config), it should look like the following: | Finally, edit {{ic|pg_hba.conf}} from {{ic|ident}} to {{ic|md5}} (except for the UNIX socket line) to allow users to log in using a password (required by moebooru's config), it should look like the following: | ||
Line 98: | Line 108: | ||
''For most small sites'', Ruby 2.3 and higher with the Unicorn server is sufficient. | ''For most small sites'', Ruby 2.3 and higher with the Unicorn server is sufficient. | ||
''A site with heavier traffic'' may find it helpful to use Rubinius with the Puma server [https://blog.engineyard.com/2014/ruby-app-server-arena-pt1to make better use of concurrent multithreading,] but this may require compilation. | ''A site with heavier traffic'' may find it helpful to use Rubinius with the Puma server [https://blog.engineyard.com/2014/ruby-app-server-arena-pt1to make better use of concurrent multithreading,] but this may require compilation, which can be fiendishly difficult. | ||
{{Warning|If you can't get Rubinius to work or to compile your gems, don't waste your time on it anymore. Just use standard Ruby 2.3.}} | |||
=== Method 1: Set up Normal Ruby 2.3 or newer === | === Method 1: Set up Normal Ruby 2.3 or newer === | ||
Line 107: | Line 119: | ||
* RHEL/CentOS: [https://www.softwarecollections.org/en/scls/rhscl/rh-ruby23/ RHSCL - Ruby 2.3] | * RHEL/CentOS: [https://www.softwarecollections.org/en/scls/rhscl/rh-ruby23/ RHSCL - Ruby 2.3] | ||
=== Method 2: | === Method 2: Installing Rubinius Binaries with chruby === | ||
{{hc|Debian/Ubuntu| | |||
sudo apt-get install openssl libreadline6 libreadline6-dev \ | |||
curl zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 \ | |||
libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev libtool \ | |||
pkg-config libgdbm-dev ncurses-dev libffi-dev | |||
}} | |||
{{hc|Red Hat/CentOS| | |||
sudo yum install ruby | |||
sudo yum install -y patch autoconf libtool sqlite-devel | |||
}} | |||
Rubinius is particularly tough to compile, and as of 2017-01-28 we have not been able to compile it with Debian Jessie. Instead, [https://rubinius.com/install/ Rubinius provides Ubuntu 14.04 binaries designed for use with Travis-Cl.] | |||
First, download and install [https://github.com/postmodern/chruby chruby] as a user with sudo privileges. | |||
{{bc| | |||
wget -O chruby-0.3.9.tar.gz https://github.com/postmodern/chruby/archive/v0.3.9.tar.gz | |||
tar -xzvf chruby-0.3.9.tar.gz | |||
cd chruby-0.3.9/ | |||
sudo make install | |||
}} | |||
Next, log in as the {{ic|moe}} user, download the latest rubinius binaries, and extract them to {{ic|/home/moe/}}: | |||
{{bc| | {{bc| | ||
sudo | sudo -i -u moe | ||
wget -O rubinius-3.70.tar.bz2 https://rubinius-binaries-rubinius-com.s3.amazonaws.com/ubuntu/14.04/x86_64/rubinius-3.70.tar.bz2 | |||
tar -xjvf rubinius-3.70.tar.bz2 | |||
}} | }} | ||
Then, activate chruby with rubinius by adding it to the bashrc. | |||
{{hc|/home/moe/.bashrc|<nowiki> | |||
source /usr/local/share/chruby/chruby.sh | |||
RUBIES+=( | |||
"$HOME/rubinius/3.70" | |||
) | |||
</nowiki>}} | |||
Finally, log out and log back into the {{ic|moe}} user, and set rubinius 3.70 as the default ruby version. | |||
{{bc| | {{bc| | ||
chruby 3.70 | |||
}} | }} | ||
==== | === Method 3: Install Rubinius with RVM === | ||
{{Note|Unfortunately, until the [https://github.com/jruby/activerecord-jdbc-adapter/issues/708 ActiveRecord-JDBC-Adapter] required by JRuby is ported to Rails 5, we can't use it with Moebooru.}} | |||
For RVM, just install any ol' ruby 2.x, we won't be using it after the compilation stage. Also install all the build dependencies. | |||
==== Installation with RVM (RHEL/CentOS) ==== | |||
{{Note|Frustratingly, Rubinius refuses to build with Debian Jessie for some darn reason, so this is for RHEL/CentOS only.}} | |||
{{bc| | {{bc| | ||
sudo yum install ruby | sudo yum install ruby | ||
sudo yum install -y patch autoconf patch automake libtool bison sqlite-devel | sudo yum install -y patch autoconf patch automake libtool bison sqlite-devel bzip2 zlib-devel libyaml-devel readline-devel openssl-devel | ||
}} | }} | ||
Line 156: | Line 204: | ||
}} | }} | ||
{{Note|Make sure to run all these steps as the {{ic|moe}} user.}} | |||
{{Note|Make sure to run all these steps as the | |||
[https://rvm.io/ Follow the RVM installation instructions, as replicated below:] | |||
{{bc|<nowiki> | {{bc|<nowiki> | ||
Line 175: | Line 221: | ||
|lang=bash}} | |lang=bash}} | ||
Refresh the rvm repos: | Refresh the rvm repos. And since we have already installed dependencies in the sections above, disable the built-in dependency resolver: | ||
{{bc| | {{bc| | ||
rvm get head | rvm get head | ||
rvm autolibs disable | |||
}} | }} | ||
Line 214: | Line 261: | ||
{{Note|If you change ruby editions later on after installing gems, make sure to run {{ic|gem pristine --all}} to delete the previous ones. After that, reinstall all gems from scratch.}} | {{Note|If you change ruby editions later on after installing gems, make sure to run {{ic|gem pristine --all}} to delete the previous ones. After that, reinstall all gems from scratch.}} | ||
<!-- | <!-- | ||
==== Installation (Debian/Ubuntu) ==== | |||
{{bc| | |||
sudo apt-get install ruby ruby-dev | |||
sudo apt-get install build-essential openssl libreadline6 libreadline6-dev \ | |||
curl git-core zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 \ | |||
libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev automake libtool bison \ | |||
subversion pkg-config libgdbm-dev ncurses-dev libffi-dev | |||
}} | |||
An LLVM version greater than 3.6+ is also required. You can get this in [https://backports.debian.org/Instructions/ Debian Jessie from backports], or in Ubuntu from normal repositories. | |||
{{bc| | |||
# if on debian jessie, set up jessie-backports: https://backports.debian.org/Instructions/ | |||
sudo apt-get install llvm-3.8 clang-3.8 libclang-3.8-dev llvm-3.8-runtime llvm-3.8-dev llvm-3.8-tools libedit2 libedit-dev | |||
}} | |||
<div class="toccolours mw-collapsible mw-collapsed" style="width:53em"> | |||
Click '''Expand''' to display the {{ic|update-alternatives}} commands, which activate 3.8 as the default clang/llvm version. | |||
<div class="mw-collapsible-content"> | |||
{{bc| | |||
sudo update-alternatives --install /usr/bin/clang++ clang++ /usr/bin/clang++-3.8 100 | |||
sudo update-alternatives --install /usr/bin/clang clang /usr/bin/clang-3.8 100 | |||
sudo update-alternatives --install \ | |||
/usr/bin/llvm-config llvm-config /usr/bin/llvm-config-3.8 200 \ | |||
--slave /usr/bin/llvm-ar llvm-ar /usr/bin/llvm-ar-3.8 \ | |||
--slave /usr/bin/llvm-as llvm-as /usr/bin/llvm-as-3.8 \ | |||
--slave /usr/bin/llvm-bcanalyzer llvm-bcanalyzer /usr/bin/llvm-bcanalyzer-3.8 \ | |||
--slave /usr/bin/llvm-cov llvm-cov /usr/bin/llvm-cov-3.8 \ | |||
--slave /usr/bin/llvm-diff llvm-diff /usr/bin/llvm-diff-3.8 \ | |||
--slave /usr/bin/llvm-dis llvm-dis /usr/bin/llvm-dis-3.8 \ | |||
--slave /usr/bin/llvm-dwarfdump llvm-dwarfdump /usr/bin/llvm-dwarfdump-3.8 \ | |||
--slave /usr/bin/llvm-extract llvm-extract /usr/bin/llvm-extract-3.8 \ | |||
--slave /usr/bin/llvm-link llvm-link /usr/bin/llvm-link-3.8 \ | |||
--slave /usr/bin/llvm-mc llvm-mc /usr/bin/llvm-mc-3.8 \ | |||
--slave /usr/bin/llvm-mcmarkup llvm-mcmarkup /usr/bin/llvm-mcmarkup-3.8 \ | |||
--slave /usr/bin/llvm-nm llvm-nm /usr/bin/llvm-nm-3.8 \ | |||
--slave /usr/bin/llvm-objdump llvm-objdump /usr/bin/llvm-objdump-3.8 \ | |||
--slave /usr/bin/llvm-ranlib llvm-ranlib /usr/bin/llvm-ranlib-3.8 \ | |||
--slave /usr/bin/llvm-readobj llvm-readobj /usr/bin/llvm-readobj-3.8 \ | |||
--slave /usr/bin/llvm-rtdyld llvm-rtdyld /usr/bin/llvm-rtdyld-3.8 \ | |||
--slave /usr/bin/llvm-size llvm-size /usr/bin/llvm-size-3.8 \ | |||
--slave /usr/bin/llvm-stress llvm-stress /usr/bin/llvm-stress-3.8 \ | |||
--slave /usr/bin/llvm-symbolizer llvm-symbolizer /usr/bin/llvm-symbolizer-3.8 \ | |||
--slave /usr/bin/llvm-tblgen llvm-tblgen /usr/bin/llvm-tblgen-3.8 | |||
|lang=bash}} | |||
[https://gist.github.com/jc00ke/b55cf7d16d584fbb2b92 Source: Github Gist - LLVM-Update-Alternatives] | |||
</div></div> | |||
==== Setup Rubinius with Zonio Repo (RHEL/CentOS) ==== | ==== Setup Rubinius with Zonio Repo (RHEL/CentOS) ==== | ||
Line 255: | Line 352: | ||
https://zonio.net/rubinius_rpm_packages/ | https://zonio.net/rubinius_rpm_packages/ | ||
--> | --> | ||
{{Note|If you encounter any issues with gems that say "Ignoring because extensions are not built", run {{ic|gem pristine --all}}}} | |||
== Mandatory Access Control == | == Mandatory Access Control == | ||
Line 261: | Line 360: | ||
anyone have apparmor profiles? | anyone have apparmor profiles? | ||
We may have to create our own through learning mode: http://www.howtogeek.com/118328/how-to-create-apparmor-profiles-to-lock-down-programs-on-ubuntu/ | |||
=== SELinux Permissions (RHEL/CentOS) === | === SELinux Permissions (RHEL/CentOS) === | ||
Line 316: | Line 417: | ||
=== Configure Moebooru === | === Configure Moebooru === | ||
All commands in this section must be run as the {{ic|moe}} user: | |||
{{bc| | {{bc|sudo -i -u moe}} | ||
First, [http://stackoverflow.com/a/9235107 do a bundle config for pg] since we're using a specific postgresql version: | |||
{{bc|bundle | {{bc|<nowiki> | ||
bundle config build.pg --with-pg-config=/usr/pgsql-9.6/bin/pg_config # Red Hat/CentOS Only | |||
bundle config build.pg --with-pg-config=/usr/bin/pg_config # Debian Only | |||
</nowiki>}} | |||
Install the ruby packages for the moebooru user only (under the directory <code>./vendor/bundle</code>): | Install the ruby packages for the moebooru user only (under the directory <code>./vendor/bundle</code>): | ||
Line 331: | Line 435: | ||
{{bc| | {{bc| | ||
cp config/database.yml.example config/database.yml | |||
cp config/local_config.rb.example config/local_config.rb | |||
chmod 700 config/database.yml | |||
chmod 700 config/local_config.rb | |||
}} | }} | ||
Generate your secret key, which is used for salts and such. | |||
{{bc|bundle exec rake secret}} | |||
Edit {{ic|config/database.yml}} using your favorite editor (such as nano), and replace {{ic|imouto}} with the password of your database user: | Edit {{ic|config/database.yml}} using your favorite editor (such as nano), and replace {{ic|imouto}} with the password of your database user: | ||
Line 361: | Line 469: | ||
{{bc|chmod 600 /home/moe/booru/config/database.yml}} | {{bc|chmod 600 /home/moe/booru/config/database.yml}} | ||
Initialize database with this command (there will be some errors reported which is | Initialize database with this command (there will be some errors reported with {{ic|ERROR: must be owner of extension plpgsql}} which is normal, proceed) | ||
{{bc|bundle exec rake db:reset}} | {{bc|bundle exec rake db:reset}} | ||
{{Note|If you have trouble creating databases because they set to SQL_ASCII by default, [https://gist.github.com/amolkhanorkar/8706915 follow this guide to require UTF-8 to be set by default.] }} | |||
{{Note|Whenever you update moebooru using {{ic|git pull}}, make sure to migrate the database table schema with the command below.}} | {{Note|Whenever you update moebooru using {{ic|git pull}}, make sure to migrate the database table schema with the command below.}} | ||
Line 375: | Line 485: | ||
{{bc|chmod 755 /home/moe/booru/public}} | {{bc|chmod 755 /home/moe/booru/public}} | ||
Start the server | Start the server: {{ic|bundle exec unicorn}} or {{ic|bundle exec puma}} if using Rubinius. Note that this will start the server in '''development mode''', which is somewhat slower. See the Production Mode section once you are ready to serve the site. | ||
== Customize Header Image and Branding == | == Customize Header Image and Branding == | ||
Line 485: | Line 595: | ||
=== Run the Server === | === Run the Server === | ||
Finally, to run the server | Finally, to run the server at, for example, port 9292, run one of the following commands: | ||
Ruby: | Ruby: | ||
Line 493: | Line 603: | ||
Rubinius: | Rubinius: | ||
{{bc|<nowiki>RAILS_ENV=production bundle exec puma -e production</nowiki>}} | {{bc|<nowiki>RAILS_ENV=production bundle exec puma -e production -p 9292</nowiki>}} | ||
* [http://stackoverflow.com/a/27318704 Source: StackOverflow - Rails 4: assets not loading in production] | * [http://stackoverflow.com/a/27318704 Source: StackOverflow - Rails 4: assets not loading in production] | ||
Line 504: | Line 614: | ||
<pre>grep -c processor /proc/cpuinfo</pre> | <pre>grep -c processor /proc/cpuinfo</pre> | ||
<pre>mkdir -p | Create a folder to store your UNIX sockets and PIDs in: | ||
{{bc| | |||
sudo mkdir /var/run/moebooru | |||
sudo chown -R moe:moe /var/run/moebooru | |||
}} | |||
Create the following folders in your application directory to store logs: | |||
<pre>mkdir -p shared/log</pre> | |||
Place the following into {{ic|<app_dir>/shared/puma.rb}}: | Place the following into {{ic|<app_dir>/shared/puma.rb}}: | ||
Line 515: | Line 633: | ||
threads 1, 6 | threads 1, 6 | ||
app_dir = File.expand_path( | app_dir = File.expand_path("../..", __FILE__) | ||
shared_dir = | shared_dir = "#{app_dir}/shared" | ||
socket_dir = "/var/run/moebooru" | |||
# Default to production | # Default to production | ||
rails_env = ENV['RAILS_ENV'] || | rails_env = ENV['RAILS_ENV'] || "production" | ||
environment rails_env | environment rails_env | ||
# Set up socket location | # Set up socket location | ||
bind | bind "unix://#{socket_dir}/puma.sock" | ||
# Logging | # Logging | ||
stdout_redirect | stdout_redirect "#{shared_dir}/log/puma.stdout.log", "#{shared_dir}/log/puma.stderr.log", true | ||
# Set master PID and state locations | # Set master PID and state locations | ||
pidfile | pidfile "#{socket_dir}/puma.pid" | ||
state_path | state_path "#{socket_dir}/puma.state" | ||
activate_control_app | activate_control_app | ||
on_worker_boot do | on_worker_boot do | ||
require | require "active_record" | ||
ActiveRecord::Base.connection.disconnect! rescue ActiveRecord::ConnectionNotEstablished | ActiveRecord::Base.connection.disconnect! rescue ActiveRecord::ConnectionNotEstablished | ||
ActiveRecord::Base.establish_connection(YAML.load_file( | ActiveRecord::Base.establish_connection(YAML.load_file("#{app_dir}/config/database.yml")[rails_env]) | ||
end | end | ||
</nowiki>}} | </nowiki>}} | ||
Line 544: | Line 663: | ||
{{hc|/etc/nginx/conf.d/booru.eikonos.org.conf|<nowiki>upstream app { | {{hc|/etc/nginx/conf.d/booru.eikonos.org.conf|<nowiki>upstream app { | ||
# Path to Puma SOCK file, as defined previously | # Path to Puma SOCK file, as defined previously | ||
server unix:/ | server unix:/var/run/moebooru/puma.sock fail_timeout=0; | ||
} | } | ||
Line 562: | Line 681: | ||
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; | proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; | ||
proxy_set_header X-Forwarded-Proto $scheme; | proxy_set_header X-Forwarded-Proto $scheme; | ||
# Fix the | # Fix the "It appears that your reverse proxy set up is broken" error. | ||
proxy_pass http://app; | proxy_pass http://app; | ||
proxy_read_timeout 90; | proxy_read_timeout 90; | ||
Line 576: | Line 695: | ||
{{bc|bundle exec puma -C shared/puma.rb}} | {{bc|bundle exec puma -C shared/puma.rb}} | ||
== Separate subdomain for images and static content == | |||
It's often a better idea to have static content served from another subdomain entirely, where it will be cached for much longer than ever changing text. And sometimes the files could be located on an entirely different server. | |||
Edit your {{ic|config/local_config.rb}} to activate the {{ic|assets.}} and {{ic|files.}} subdomains. | |||
{{hc|config/local_config.rb|<nowiki> | |||
# Servers for static files (assets and uploaded files) | |||
CONFIG[:file_hosts] = { :files => "files.eikonos.org", :assets => "assets.eikonos.org" } | |||
</nowiki>}} | |||
Then, create these two nginx configs (customize the server_name to your subdomains, must start with {{ic|assets.}} and {{ic|files.}}): | |||
{{hc|/etc/nginx/conf.d/moebooru_assets.conf|<nowiki>server { | |||
listen 127.0.0.1:8080; # tells Nginx to listen for traffic passed by Varnish if unencrypted http | |||
server_name assets.eikonos.org; | |||
# directory of static assets, first generate with the command: | |||
# RAILS_ENV=production bundle exec rake assets:precompile | |||
root /home/moe/booru/public; | |||
error_page 500 502 503 504 /500.html; | |||
keepalive_timeout 10; | |||
location ^~ / { | |||
expires 1M; | |||
access_log off; | |||
add_header Cache-Control "public"; | |||
try_files $uri =404; | |||
} | |||
# users must access files.eikonos.org for full images, though thumbs are shared through assets | |||
location ^~ /data/images/ { deny all; } | |||
} | |||
</nowiki>}} | |||
{{hc|/etc/nginx/conf.d/moebooru_files.conf|<nowiki> | |||
server { | |||
listen 127.0.0.1:8080; # tells Nginx to listen for traffic passed by Varnish if unencrypted http | |||
server_name files.eikonos.org; | |||
# directory of full size files | |||
root /home/moe/booru/public/; | |||
error_page 500 502 503 504 /500.html; | |||
keepalive_timeout 10; | |||
location ^~ /data/ { | |||
expires 1M; | |||
access_log off; | |||
add_header Cache-Control "public"; | |||
try_files $uri =404; | |||
} | |||
location ^~ /assets/ { deny all; } # users must access assets.eikonos.org for this | |||
} | |||
</nowiki>}} | |||
== Systemd Service == | == Systemd Service == | ||
Line 686: | Line 862: | ||
}} | }} | ||
Images | Images and thumbs and other generated items: | ||
{{bc| | {{bc| | ||
tar -cvzf eikonos.org- | tar -cvzf eikonos.org-20170128_data.tar.gz /var/www/moebooru/public/data/ | ||
}} | }} | ||
Code only, no binaries: | Code only, no binaries or image data: | ||
{{bc|<nowiki> | {{bc|<nowiki> | ||
tar --exclude='/home/moe/booru/tmp' --exclude='/home/moe/booru/vendor' -cvjf eikonos.org-20170128_var_www_booru-eikonos-org.tar.gz /home/moe/booru | tar --exclude='/home/moe/booru/tmp' --exclude='/home/moe/booru/public' --exclude='/home/moe/booru/vendor' -cvjf eikonos.org-20170128_var_www_booru-eikonos-org.tar.gz /home/moe/booru | ||
</nowiki>}} | </nowiki>}} | ||
== Restore/Move == | |||
=== PostgreSQL database === | |||
First, create the user with CreateDB permissions: | |||
{{bc| | |||
# su - postgres | |||
$ psql | |||
postgres # CREATE USER moebooru_user CREATEDB; | |||
}} | |||
then import the sql dump with that user. | |||
== Troubleshooting == | |||
=== Pagination not showing in Post#index === | |||
{{Note|This issue only occurs when you are using the default cache instead of Memcached. We strongly recommend using Memcached for this reason.}} | |||
https://github.com/moebooru/moebooru/issues/42 | |||
=== Atom RSS Canonical URL Problem === | |||
Bloo had met an issue with the [https://github.com/moebooru/moebooru/issues/71 Atom RSS URLs pointing to his IP instead of the domain name.] Here's the patch he used: | |||
{{bc| | |||
--- a/app/helpers/application_helper.rb | |||
+++ b/app/helpers/application_helper.rb | |||
@@ -126,7 +126,7 @@ module ApplicationHelper | |||
elsif post.is_a?(Array) | |||
posts = post | |||
- new_params = params.to_unsafe_h.merge :only_path => true | |||
+ new_params = params.to_unsafe_h.merge :host=>'otakupaper.com' | |||
if posts.previous_page.present? | |||
html << tag("link", :href => url_for(new_params.merge :page => 1), :rel => "first", :title => "First Page") | |||
diff --git a/app/helpers/post_helper.rb b/app/helpers/post_helper.rb | |||
index 32cf04f..cf98cb5 100644 | |||
--- a/app/helpers/post_helper.rb | |||
+++ b/app/helpers/post_helper.rb | |||
@@ -18,7 +18,7 @@ module PostHelper | |||
"type" => tag_options[:type] || "application/#{type}+xml", | |||
"title" => tag_options[:title] || type.to_s.upcase, | |||
"id" => tag_options[:id], | |||
- "href" => url_options.is_a?(Hash) ? url_for(url_options.merge(:only_path => false)) : url_options | |||
+ "href" => url_options.is_a?(Hash) ? url_for(url_options.merge(:host => CONFIG["server_host"])) : url_options | |||
) | |||
end | |||
}} | |||
== Sources == | == Sources == | ||
* Get configuration tips from here: http://wiki.douglasqsantos.com.br/doku.php/deploying_a_rails_app_on_debian_jessie_with_capistrano_nginx_and_puma_en | * Get configuration tips from here: http://wiki.douglasqsantos.com.br/doku.php/deploying_a_rails_app_on_debian_jessie_with_capistrano_nginx_and_puma_en |
Revision as of 02:07, 19 July 2017
Moebooru is a well maintained Danbooru-style image tag system, used by Yande.re, Konachan, and many others. It is written in Ruby, and can be a bit of a challenge to install. Since many other installation guides are insufficient, we've noted down our entire installation and configuration process for Eikonos.
Assumptions
In this guide, we make certain assumptions about your configuration. Your situation may vary.
- Nginx - The webserver used in this guide. Follow the instructions in that page to install Nginx. Then, you can find some sample Nginx configurations for Moebooru in sections below.
* www-data - A group used by all webservers. Make sure to add the nginx user to this group!
moe
user - The unprivileged user that runs this app. After configuration, this will be converted to a nonlogin user./home/moe/booru/
- The home folder of the moebooru user, where the application data will be stored from agit clone
./home/moe/booru/shared/
- The location of the UNIX sockets that puma will use. It is probably safer to put it into/var/run/moebooru
instead, but it is what it is and we have SELinux policies to account for it.
/var/www/moebooru/public/
- The public directory will be moved to/var/www/
, and symlinked to/home/moe/booru/public/
. This way, Nginx will not have control over the entire application directory.- Make sure to restore this symlink every time an upgrade is run with
git pull
.
- Make sure to restore this symlink every time an upgrade is run with
Create Moebooru User
Create a specific non-login daemon user just for moebooru (Though it will have bash shell for setup purposes temporarily).
sudo adduser moe # create whatever password
sudo passwd -d moe # delete password to prevent normal login
sudo -i -u moe # become the moe user
git clone https://github.com/moebooru/moebooru.git /home/moe/booru
chown -R moe:moe /home/moe/booru
As root, we also need to move all publicly served assets to /var/www/
.
sudo mkdir -p /var/www/moebooru
sudo mv /home/moe/booru/public /var/www/moebooru/
sudo ln -s /var/www/moebooru/public /home/moe/booru/public
sudo chown moe:moe /home/moe/booru/public
sudo chmod 755 /var/www/moebooru/public
sudo chown root:www-data -R /var/www/moebooru
Setup Postgresql
The examples below use PostgreSQL 9.6, but as of 2017-01-28, Moebooru just needs greater than 9.4.
Debian: (Alternatively, you can get it from jessie-backports and newer)
/etc/apt/sources.list.d/pgdg.list
deb http://apt.postgresql.org/pub/repos/apt/ YOUR_DEBIAN_VERSION_HERE-pgdg main
wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc
# yum install http://yum.postgresql.org/9.6/redhat/rhel-7-x86_64/pgdg-redhat95-9.5-2.noarch.rpm
# yum install postgresql96 postgresql96-devel postgresql96-server libpqxx libpqxx-devel
libpqxx
is required for libpq-ruby to build.
Then, initialize and start the database.
# /usr/pgsql-9.6/bin/postgresql96-setup initdb
# systemctl start postgresql-9.6
Now log in and create the moebooru database and user with createdb permissions: (make sure to give it a very good password!)
$ sudo su # becoming the postgres user doesn't really work with sudo for some reason
# su - postgres
$ psql
postgres # CREATE USER moebooru_user WITH PASSWORD 'your_password' CREATEDB;
Finally, edit pg_hba.conf
from ident
to md5
(except for the UNIX socket line) to allow users to log in using a password (required by moebooru's config), it should look like the following:
RHEL/CentOS: /var/lib/pgsql/9.6/data/pg_hba.conf Debian: /etc/postgresql/9.6/main/pg_hba.conf
# "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 # Allow replication connections from localhost, by a user with the # replication privilege. #local replication postgres peer #host replication postgres 127.0.0.1/32 trust #host replication postgres ::1/128 trust
Once you have this file edited as seen above, restart postgresql.
sudo systemctl restart postgresql-9.6
Install Nodejs
NodeJS is necessary for the frontend. You should obtain the latest version, 7.x: by following these guides for your distro.
Setup Ruby
For most small sites, Ruby 2.3 and higher with the Unicorn server is sufficient.
A site with heavier traffic may find it helpful to use Rubinius with the Puma server make better use of concurrent multithreading, but this may require compilation, which can be fiendishly difficult.
Method 1: Set up Normal Ruby 2.3 or newer
Most distros have an outdated version of Ruby, so you must set up repositories from the official developers:
- Debian: Brightbox PPA - Ruby 2.3
- RHEL/CentOS: RHSCL - Ruby 2.3
Method 2: Installing Rubinius Binaries with chruby
Debian/Ubuntu
sudo apt-get install openssl libreadline6 libreadline6-dev \ curl zlib1g zlib1g-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 \ libxml2-dev libxslt-dev autoconf libc6-dev ncurses-dev libtool \ pkg-config libgdbm-dev ncurses-dev libffi-dev
Red Hat/CentOS
sudo yum install ruby sudo yum install -y patch autoconf libtool sqlite-devel
Rubinius is particularly tough to compile, and as of 2017-01-28 we have not been able to compile it with Debian Jessie. Instead, Rubinius provides Ubuntu 14.04 binaries designed for use with Travis-Cl.
First, download and install chruby as a user with sudo privileges.
wget -O chruby-0.3.9.tar.gz https://github.com/postmodern/chruby/archive/v0.3.9.tar.gz
tar -xzvf chruby-0.3.9.tar.gz
cd chruby-0.3.9/
sudo make install
Next, log in as the moe
user, download the latest rubinius binaries, and extract them to /home/moe/
:
sudo -i -u moe
wget -O rubinius-3.70.tar.bz2 https://rubinius-binaries-rubinius-com.s3.amazonaws.com/ubuntu/14.04/x86_64/rubinius-3.70.tar.bz2
tar -xjvf rubinius-3.70.tar.bz2
Then, activate chruby with rubinius by adding it to the bashrc.
/home/moe/.bashrc
source /usr/local/share/chruby/chruby.sh RUBIES+=( "$HOME/rubinius/3.70" )
Finally, log out and log back into the moe
user, and set rubinius 3.70 as the default ruby version.
chruby 3.70
Method 3: Install Rubinius with RVM
For RVM, just install any ol' ruby 2.x, we won't be using it after the compilation stage. Also install all the build dependencies.
Installation with RVM (RHEL/CentOS)
sudo yum install ruby
sudo yum install -y patch autoconf patch automake libtool bison sqlite-devel bzip2 zlib-devel libyaml-devel readline-devel openssl-devel
One special build dependency is llvm-3.6+. Unfortunately, CentOS 7's EPEL repo only has 3.4, so we will need to get the latest build of LLVM from Fedora COPR.
/etc/yum.repos.d/daveisfera-llvm_3.7-epel-7.repo
[daveisfera-llvm_3.7] name=Copr repo for llvm_3.7 owned by daveisfera baseurl=https://copr-be.cloud.fedoraproject.org/results/daveisfera/llvm_3.7/epel-7-$basearch/ type=rpm-md skip_if_unavailable=True gpgcheck=1 gpgkey=https://copr-be.cloud.fedoraproject.org/results/daveisfera/llvm_3.7/pubkey.gpg repo_gpgcheck=0 enabled=1 enabled_metadata=1
Then just install llvm as normal:
sudo yum install clang llvm llvm-devel llvm-static libedit libedit-devel
Follow the RVM installation instructions, as replicated below:
sudo -i -u moe
gpg --keyserver hkp://keys.gnupg.net --recv-keys 409B6B1796C275462A1703113804BB82D39DC0E3
curl -sSL https://get.rvm.io | bash -s stable
Then, log out and log back in to reload bash and make the RVM command work:
exit
sudo -i -u moe
Refresh the rvm repos. And since we have already installed dependencies in the sections above, disable the built-in dependency resolver:
rvm get head
rvm autolibs disable
Install rubinius. Compilation will take a while.
rvm install rbx
After installation, choose Rubinius (rbx) as the default ruby version to use.
rvm list
This will list out various ruby versions.
rvm alias create default rbx
Finally, log out and log back in, and check your current ruby version to ensure that Rubinius is default.
ruby -v
Now that your ruby type is set up, install bundler.
gem install bundler
Mandatory Access Control
AppArmor (Debian/Ubuntu)
anyone have apparmor profiles?
We may have to create our own through learning mode: http://www.howtogeek.com/118328/how-to-create-apparmor-profiles-to-lock-down-programs-on-ubuntu/
SELinux Permissions (RHEL/CentOS)
If using SELinux (which we highly recommend), you will need the following policies, assuming that everything is installed to /home/moe/booru/
:
needed for proxy pass
sudo chcon -Rt httpd_sys_content_t /var/www/ # allow nginx to access folders sudo setsebool httpd_can_network_connect 1 -P # allows reverse proxy sudo setsebool -P httpd_can_network_memcache 1 # allows memcache
needed to serve from moebooru user's directory, but only shared/
and public
folders
setsebool -P httpd_enable_homedirs 1 sudo semanage fcontext -a -t httpd_sys_content_t '/home/moe/booru/shared(/.*)?' sudo restorecon -R -v /home/moe/booru/shared sudo semanage fcontext -a -t httpd_sys_content_t '/var/www/moebooru/public(/.*)?' sudo restorecon -R -v /var/www/moebooru/public
https://www.pckr.co.uk/selinux-nginx-and-reverse-proxying-2/
The last step is to run the final allows.
sudo grep nginx /var/log/audit/audit.log | audit2allow -M nginx > nginx.te
Open up the nginx.te
file and see that it is correct (such that no suspicious rule allows are inside). Then run:
sudo grep nginx /var/log/audit/audit.log | audit2allow -M nginx sudo semodule -i nginx.pp
http://axilleas.me/en/blog/2013/selinux-policy-for-nginx-and-gitlab-unix-socket-in-fedora-19/
Setup Moebooru
Now, conduct the setup and get dependencies.
Dependencies (Debian/Ubuntu)
sudo apt-get install build-essential libxml2-dev libxslt1-dev libpq-dev git jhead libgd2-noxpm-dev imagemagick
- build-essential - a meta-package that installs various tools and libraries necessary for program (mostly C++ and Perl) compilation and interpretation.
- libxml2 - library that is required for XML support. It is necessary for moebooru’s external API to work.
- libxslt1 - extension of libxml that allows better xml parsing and converting.
- libpq-dev - library that is necessary to build postgres connection module for ruby.
- git - version control system - we will use it for moebooru installation and updating.
- jhead - image processing tool that extracts EXIF information from image files.
- libgd2-noxpm - an image processing library.
- libgs2-noxpm-dev - an extension for compiling GD2 support for applications.
- imagemagick - collection of tools for image processing
Dependencies (RHEL/CentOS)
sudo yum install gcc gcc-c++ ImageMagick jhead libxslt-devel git libyaml-devel openssl-devel pcre-devel readline-devel
Configure Moebooru
All commands in this section must be run as the moe
user:
sudo -i -u moe
First, do a bundle config for pg since we're using a specific postgresql version:
bundle config build.pg --with-pg-config=/usr/pgsql-9.6/bin/pg_config # Red Hat/CentOS Only
bundle config build.pg --with-pg-config=/usr/bin/pg_config # Debian Only
Install the ruby packages for the moebooru user only (under the directory ./vendor/bundle
):
bundle install --path vendor/bundle
Obtain config/database.yml
and config/local_config.rb
from the .example
files, and configure them accordingly. Then set chmod 700
so only the moebooru user can read the database password.
cp config/database.yml.example config/database.yml
cp config/local_config.rb.example config/local_config.rb
chmod 700 config/database.yml
chmod 700 config/local_config.rb
Generate your secret key, which is used for salts and such.
bundle exec rake secret
Edit config/database.yml
using your favorite editor (such as nano), and replace imouto
with the password of your database user:
config/database.yml
login: &login adapter: postgresql username: moe password: imouto host: 127.0.0.1 development: database: moebooru_dev <<: *login test: database: moebooru_test <<: *login production: database: moebooru <<: *login
chmod 600 /home/moe/booru/config/database.yml
Initialize database with this command (there will be some errors reported with ERROR: must be owner of extension plpgsql
which is normal, proceed)
bundle exec rake db:reset
Then, migrate the database tables.
bundle exec rake db:migrate
Now, you need to provide the correct permissions to the public folder:
chmod 755 /home/moe/booru/public
Start the server: bundle exec unicorn
or bundle exec puma
if using Rubinius. Note that this will start the server in development mode, which is somewhat slower. See the Production Mode section once you are ready to serve the site.
Customize Header Image and Branding
By default, Moebooru comes with the Yande.re header image and branding, as the site developed the moebooru engine. You should definitely consider removing the original branding unless your site is private.
app/assets/images
public/favicon.ico
Enable Memcached
Memcached is a high performance caching solution and is needed to have Moebooru enumerate posts and create the /posts pagination bar. Follow these instructions to install Memcached. You need at least 2GB free RAM to provide.
Installation (Debian/Ubuntu)
sudo apt-get install memcached
https://kyup.com/tutorials/install-use-memcache/
Installation (RHEL/CentOS)
sudo yum install memcached
http://www.liquidweb.com/kb/how-to-install-memcached-on-centos-7/
Configuration
Edit /etc/sysconfig/memcached
and set CACHESIZE=2048
(2GB RAM) if possible.
Then set memcached to start at every boot:
sudo systemctl restart memcached
Config-based Activation
Add these options to the following file. When you start moebooru again, memcached will be active.
config/local_config.rb
# The server and port where the memcache client can be accessed. Only relevant if you enable caching. CONFIG["memcache_servers"] = ["localhost:11211"] # This enables various caching mechanisms. You must have memcache (and the memcache-client ruby gem) installed in order for caching to work. CONFIG["enable_caching"] = true
ENV-based Memcached Activation
Activate it by appending a bash variable to the puma command: MB_MEMCACHE_SERVERS="<url-to-memcached>"
. Here are some examples.
TCP: MB_MEMCACHED_SERVERS='127.0.0.1:11211' RAILS_ENV=production bundle exec puma -e production
UNIX Socket: MB_MEMCACHED_SERVERS='127.0.0.1:11211' RAILS_ENV=production bundle exec puma -C shared/puma.rb
SELinux Permissions
You will probably need to allow it through SELinux:
https://major.io/2011/09/07/getting-apache-php-and-memcached-working-with-selinux/
Production Mode
By default, Moebooru runs in development mode, which can be slow (since it's designed to allow debug and automatic recompilation). Here are the steps to set up Production mode.
Preparation
First, you need to create the database, and pregenerate the javascript/css (do this every time you update):
RAILS_ENV=production bundle exec rake db:reset RAILS_ENV=production bundle exec rake assets:precompile
Then, you need to provide the correct permissions to the public folder:
chmod 755 /var/www/moebooru/public
Serve static files with Nginx
Create an Nginx config under /etc/nginx/conf.d/
. Make sure to change the server_name
.
Note: If you are using a different port for puma, (by adding
-p 3000
to the serving command), also change the port accordingly below.
server { listen 80; server_name booru.eikonos.org; # directory of static assets, first generate with the command: # RAILS_ENV=production bundle exec rake assets:precompile root /var/www/moebooru/public; try_files $uri/index.html $uri @app; location @app { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; # Fix the "It appears that your reverse proxy set up is broken" error. proxy_pass http://127.0.0.1:9292; proxy_read_timeout 90; proxy_redirect http://127.0.0.1:9292 http://$server_name; } error_page 500 502 503 504 /500.html; client_max_body_size 4G; keepalive_timeout 10; }
Run the Server
Finally, to run the server at, for example, port 9292, run one of the following commands:
Ruby:
bundle exec unicorn -p 9292 -E production
Rubinius:
RAILS_ENV=production bundle exec puma -e production -p 9292
Serve with UNIX Socks in Production Mode
for even more effectiveness, use a UNIX sock: https://www.digitalocean.com/community/tutorials/how-to-deploy-a-rails-app-with-puma-and-nginx-on-ubuntu-14-04
Figure out the amount of CPU cores you have:
grep -c processor /proc/cpuinfo
Create a folder to store your UNIX sockets and PIDs in:
sudo mkdir /var/run/moebooru
sudo chown -R moe:moe /var/run/moebooru
Create the following folders in your application directory to store logs:
mkdir -p shared/log
Place the following into <app_dir>/shared/puma.rb
:
shared/puma.rb
# Change to match your CPU core count workers 8 # Min and Max threads per worker threads 1, 6 app_dir = File.expand_path("../..", __FILE__) shared_dir = "#{app_dir}/shared" socket_dir = "/var/run/moebooru" # Default to production rails_env = ENV['RAILS_ENV'] || "production" environment rails_env # Set up socket location bind "unix://#{socket_dir}/puma.sock" # Logging stdout_redirect "#{shared_dir}/log/puma.stdout.log", "#{shared_dir}/log/puma.stderr.log", true # Set master PID and state locations pidfile "#{socket_dir}/puma.pid" state_path "#{socket_dir}/puma.state" activate_control_app on_worker_boot do require "active_record" ActiveRecord::Base.connection.disconnect! rescue ActiveRecord::ConnectionNotEstablished ActiveRecord::Base.establish_connection(YAML.load_file("#{app_dir}/config/database.yml")[rails_env]) end
Change the Nginx server config to the following:
/etc/nginx/conf.d/booru.eikonos.org.conf
upstream app { # Path to Puma SOCK file, as defined previously server unix:/var/run/moebooru/puma.sock fail_timeout=0; } server { listen 80; server_name booru.eikonos.org; # directory of static assets, first generate with the command: # RAILS_ENV=production bundle exec rake assets:precompile root /var/www/moebooru/public; try_files $uri/index.html $uri @app; location @app { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-Forwarded-Proto $scheme; # Fix the "It appears that your reverse proxy set up is broken" error. proxy_pass http://app; proxy_read_timeout 90; proxy_redirect http://app http://$server_name; } error_page 500 502 503 504 /500.html; client_max_body_size 4G; keepalive_timeout 10; }
Finally, to run the server, use the following:
bundle exec puma -C shared/puma.rb
Separate subdomain for images and static content
It's often a better idea to have static content served from another subdomain entirely, where it will be cached for much longer than ever changing text. And sometimes the files could be located on an entirely different server.
Edit your config/local_config.rb
to activate the assets.
and files.
subdomains.
config/local_config.rb
# Servers for static files (assets and uploaded files) CONFIG[:file_hosts] = { :files => "files.eikonos.org", :assets => "assets.eikonos.org" }
Then, create these two nginx configs (customize the server_name to your subdomains, must start with assets.
and files.
):
/etc/nginx/conf.d/moebooru_assets.conf
server { listen 127.0.0.1:8080; # tells Nginx to listen for traffic passed by Varnish if unencrypted http server_name assets.eikonos.org; # directory of static assets, first generate with the command: # RAILS_ENV=production bundle exec rake assets:precompile root /home/moe/booru/public; error_page 500 502 503 504 /500.html; keepalive_timeout 10; location ^~ / { expires 1M; access_log off; add_header Cache-Control "public"; try_files $uri =404; } # users must access files.eikonos.org for full images, though thumbs are shared through assets location ^~ /data/images/ { deny all; } }
/etc/nginx/conf.d/moebooru_files.conf
server { listen 127.0.0.1:8080; # tells Nginx to listen for traffic passed by Varnish if unencrypted http server_name files.eikonos.org; # directory of full size files root /home/moe/booru/public/; error_page 500 502 503 504 /500.html; keepalive_timeout 10; location ^~ /data/ { expires 1M; access_log off; add_header Cache-Control "public"; try_files $uri =404; } location ^~ /assets/ { deny all; } # users must access assets.eikonos.org for this }
Systemd Service
https://github.com/puma/puma/blob/master/docs/systemd.md
Save this to /usr/systemd/system/moebooru.service
. There are two versions, one for TCP and one for unix socket. Change the WorkingDirectory accordingly.
TCP
/usr/systemd/system/moebooru.service
[Unit] Description=Moebooru's Puma HTTP Server Requires=postgresql-9.6.service Wants=postgresql-9.6.service memcached.service After=network.target postgresql-9.6.service # Uncomment for socket activation (see below) # Requires=puma.socket [Service] # Foreground process (do not use --daemon in ExecStart or config.rb) Type=simple # Preferably configure a non-privileged user User=moe # Specify the path to your puma application root WorkingDirectory=/home/moe/booru # Helpful for debugging socket activation, etc. # Environment=PUMA_DEBUG=1 # The command to start Puma # Here we are using a binstub generated via: # `bundle binstubs puma --path ./sbin` # in the WorkingDirectory (replace <WD> below) # You can alternatively use `bundle exec --keep-file-descriptors puma` # ExecStart=<WD>/sbin/puma -b tcp://0.0.0.0:9292 -b ssl://0.0.0.0:9293?key=key.pem&cert=cert.pem # Alternatively with a config file (in WorkingDirectory) and # comparable `bind` directives ExecStart=/bin/bash -c 'RAILS_ENV=production /usr/bin/bundle exec puma -e production' Restart=always [Install] WantedBy=multi-user.target
UNIX Socket
Two Systemd services are needed: one for the socket and one for the application.
/usr/systemd/system/moebooru.service
[Unit] Description=Puma HTTP Server Requires=postgresql-9.6.service Wants=postgresql-9.6.service memcached.service After=network.target postgresql-9.6.service # Uncomment for socket activation (see below) # Requires=puma.socket [Service] # Foreground process (do not use --daemon in ExecStart or config.rb) Type=simple # Preferably configure a non-privileged user # User= # Specify the path to your puma application root # WorkingDirectory= # Helpful for debugging socket activation, etc. # Environment=PUMA_DEBUG=1 # The command to start Puma # Here we are using a binstub generated via: # `bundle binstubs puma --path ./sbin` # in the WorkingDirectory (replace <WD> below) # You can alternatively use `bundle exec --keep-file-descriptors puma` # ExecStart=<WD>/sbin/puma -b tcp://0.0.0.0:9292 -b ssl://0.0.0.0:9293?key=key.pem&cert=cert.pem # Alternatively with a config file (in WorkingDirectory) and # comparable `bind` directives # ExecStart=<WD>/sbin/puma -C config.rb Restart=always [Install] WantedBy=multi-user.target
Grab some code from here?
https://github.com/puma/puma/issues/976
SSL Certificates
While this is beyond the scope of this guide, you should strongly consider using SSL certificates, which are now free with Let's Encrypt.
https://www.digitalocean.com/community/tutorials/how-to-secure-nginx-with-let-s-encrypt-on-centos-7
Full Backup
PostgreSQL Database (run as moebooru user!):
pg_dump -U moebooru -W moebooru > eikonos.org-20170128.pg.sql # will ask for password
Images and thumbs and other generated items:
tar -cvzf eikonos.org-20170128_data.tar.gz /var/www/moebooru/public/data/
Code only, no binaries or image data:
tar --exclude='/home/moe/booru/tmp' --exclude='/home/moe/booru/public' --exclude='/home/moe/booru/vendor' -cvjf eikonos.org-20170128_var_www_booru-eikonos-org.tar.gz /home/moe/booru
Restore/Move
PostgreSQL database
First, create the user with CreateDB permissions:
# su - postgres
$ psql
postgres # CREATE USER moebooru_user CREATEDB;
then import the sql dump with that user.
Troubleshooting
Pagination not showing in Post#index
https://github.com/moebooru/moebooru/issues/42
Atom RSS Canonical URL Problem
Bloo had met an issue with the Atom RSS URLs pointing to his IP instead of the domain name. Here's the patch he used:
Sources
- Get configuration tips from here: http://wiki.douglasqsantos.com.br/doku.php/deploying_a_rails_app_on_debian_jessie_with_capistrano_nginx_and_puma_en